SWIRL REMOVER

Easily Removes Swirl Marks, Etched In Water Spots and Other Minor Imperfections from Your Finish

• "One Step" to Eliminate Imperfections and Wax At Same Time
• Premium Grade Carnauba Wax
• Works Excellent by Hand or With a Buffer
• Great on Black and Dark Colored Finishes
• Removes Water Spots Even on Glass

Swirl Marks are really fine scratches and there are only two ways to reduce their appearance - either polish them out or fill them in. Jax Wax Swirl Remover works exceptionally well on Black and Darker Colored finishes where imperfections in paint tend to be more noticeable.

Used by hand, Jax Wax Swirl Remover is a premium grade carnauba wax that fills in fine scratches and swirls to reduce the appearance of swirl marks and applies wax at the same time. Unlike other products, which require a "filler" like a glaze, then a wax application - Jax Wax Swirl Remover combines both steps into one, cutting your time in half. Jax Wax Swirl Remover wipes on, and wipes off easily.

Used with a buffer and a foam pad, Jax Wax Swirl Remover will eliminate the finest of scratches to produce a mirror-like finish and applies wax at the same time.

Jax Wax Swirl Remover is a true "One-Step" premium-grade specialty product that is designed to be used either way.

Jax Wax Swirl Remover works excellent to remove Water Spots that are "etched" into your finish and even on glass surfaces.

Other than leaving a brilliant high gloss, Jax Wax Swirl Remover provides superior protection and durability, and is safe for all multi-stage and clear coat finishes, chrome and glass surfaces. Jax Wax Swirl Remover works equally well when applying by hand or with a buffer.

Now you can get fast, commercial-quality results by using the same products the "pros" do - and by doing it yourself!

Directions For Hand Application:

1) For best results - start with a clean surface - wash it first!
The better surface you start with the better the finish will look. We suggest using Jax Wax Wash N Wax or Jax Wax Super Suds.

2) Shake well before using and occasionally during application.

3) Use a Wax Applicator to apply the product in thin even layers.
Thin is In! Think of it like painting a wall - a couple of thin even applications of wax is better. Don't apply wax like most people that use laundry detergent and think more is better. You not are adding anymore protection, durability or shine by using more wax. By applying the wax thin, you also avoid caking it in the body seams and are not wasting precious product. No need to use circular wiping motions! Just wipe it on in straight lines, slightly overlapping each time. From our experience, a good Wax Applicator makes all the difference in applying the product in thin even layers, is inexpensive and is worth it's weight in gold!

4) Do the entire vehicle at once.
Don't be scared. The wax comes off so easy without streaking, smearing, hazing or dust, it is not necessary to do sections at a time.

5. Wax your windshield, glass, mirrors and chrome.
The product works similar to rain repellent. It will not streak on the windshield with the wipers on, even at night. In fact, you won;t have to use your wipers as much and the water will be right off.

6. After the wax dries, wipe it off with a Microfiber Towel and reveal a brilliant finish!
We suggest using a Microfiber Towel as it will make the job easier and reduces the chances of scratching the surface. Turn your Microfiber Towel over frequently. The wax comes off very easy. No need to use pressure or rub the finish, let the Microfiber Towel do the work. Excessive rubbing and pressure even with a Microfiber Towel can cause swirl marks.

Directions For Buffer Application:

Using a HIgh Speed Rotary Buffer is like "micro-sanding" or leveling the surface to blend the high spots in with the low spots using a high-speed rotary buffer. This requires skill and practice, and unless you have that, we recommend hiring a professional since it is easy to ruin your finish without the proper experience, tools and knowledge. For example, the clear coats on today's finishes are only as thick as a piece of paper. Another option is to use an Orbital Buffer, where you are less likely to "burn" your finish and will safely remove most light Swirl Marks.

1. Apply Jax Wax Swirl Remover to the Pad
2. With the Buffer Turned Off, spread the product over the area
3. Turn the Buffer On, and with Light Pressure move it Across and Up and Down the area.
4. With a Microfiber Towel, Wipe the Area and Inspect to See if the Swirl Marks have been Removed.
5. If not, Repeat the Process Increasing Pressure as Needed.
6. Once Removed, Wipe with a Microfiber Towel to a Brilliant Finish

We suggest using a Microfiber Towel as it will make the job easier and reduces the chances of scratching the surface. Turn your Microfiber Towelover frequently. The wax comes off very easy. No need to use pressure or rub the finish, let the Microfiber Towel do the work. Excessive rubbing and pressure even with aMicrofiber Towel can cause swirl marks.

Directions For Removing Water Spots:

You can remove most water spots by using a wax applicator by hand, but that requires putting a lot of pressure on the applicator and will wear your arms out. We've used this method at shows to demonstrate how well Jax Wax Swirl Remover works at removing water spots without access to a buffer. If you are not experienced in using a high speed rotary buffer, we suggest using an Orbital Buffer. An Orbital Buffer will safely remove the water spots and save wear and tear on your arms.

1. Apply Jax Wax Swirl Remover to the Pad
2. With the Buffer Turned Off, spread the product over the area
3. Turn the Buffer On, and with Light Pressure move it Across and Up and Down the area.
4. With a Microfiber Towel, Wipe the Area and Inspect to See if the Water Mark has been Removed.
5. If not, Repeat the Process Increasing Pressure as Needed.
6. Once Removed, Wipe with a Microfiber Towel to a Brilliant Finish

We suggest using a Microfiber Towel as it will make the job easier and reduces the chances of scratching the surface. Turn your Microfiber Towelover frequently. The wax comes off very easy. No need to use pressure or rub the finish, let the Microfiber Towel do the work. Excessive rubbing and pressure even with a Microfiber Towel can cause swirl marks.

The reason that we are confident that you will love Jax Swirl Remover is simple - We ARE the Manufacturer. Even though more costly, we only use the highest quality ingredients and do not dilute our products to increase profits.

This is the same car wax that we sell to our commercial customers consisting of hundreds of car dealers, professional detailers, auto body shops and classic car owners every day. Jax Wax car wax is commercial products that are of higher quality than than most "retail" car wax products that sit on the "wax wall" vying for your hard earned dollars with slick labels and packaging.